1. Heim
  3. FD570 Rolling Stand for JAV H10S Pro Smart Board(55"/65") Installation Guide

FD570 Rolling Stand for JAV H10S Pro Smart Board(55"/65") Installation Guide

Welcome to the installation guide for the FD570 Rolling Stand for your JAV H10S Pro Smart Board. Please note: The FD570 rolling stand is specifically designed for the JAV Smart Board H10S Pro 55" and 65" models only. This easy-to-follow tutorial will walk you through each step of the assembly process, ensuring a secure and efficient setup. Whether you're setting up for a classroom, office, or any other space, this guide will help you get your smart board mounted and ready to use in no time. Let’s get started!

Included Parts:

  • 2 Tripods

  • 1 Tray

  • 1 Mount Plate

  • 2 Pillars

  • 2 Hanging Strips

  • 4 Rolling Wheels

  • Miscellaneous: Screws, Screwdriver, Wrench

1. Wheel Installation

Begin by securing the four rolling wheels to the bottom of the tripod legs. Use the included wrench to tighten each wheel firmly, ensuring they are securely attached.

2. Tripod Assembly

  • Attach the two tripods by tightening the bolts on each side.

  • Ensure the bolts are securely fastened for stability.

3. Tray Installation

  • Align the tray's slot with the bolt on the tripod.

  • Secure the tray in place by tightening it with a screwdriver.

  • Adjust the height of the tray and fasten the bolts for a secure fit.

4. Pillar Installation

  • Connect the two pillars to the tripods, making sure the sides with the screw holes face inward.

  • Fasten the pillars securely using the provided nuts.

  • Tighten the screws on both sides to ensure stability.

5. Mounting Plate Installation

  • Place the mounting plate in position on the frame.

  • Secure the mounting plate with screws, ensuring both sides are level.

  • Double-check that the plate is secured and remains at the same height on both sides.

6. Mounting Strip Installation

  • Mount the hanging strips onto the screen, ensuring they are aligned correctly. Fasten all the nuts and bolts, ensuring that the hooks face downwards.

  • Pull the latch upwards to secure the smart board to the rolling stand.

Final Steps:

  • Mount the board onto the rolling stand.

  • Once the board is in place, return the two latches to their original position.

  • Tighten the bolts on both sides of the latches to secure the smart board firmly.

Your FD570 Rolling Stand for JAV H10S Pro Smart Board is now fully assembled and ready for use!

Contact Us